Staff Profile

Introduction

Dr Dehong Huo joined School of Mechanical and Systems Engineering of Newcastle University in 2011 (became part of School of Engineering from 1st August 2017). Dr Huo has been researching in the area of ultra-precision machine development, vibration-assisted machining, and micro-machining particularly micro-milling process. More recently his work in precision manufacturing is focused on developing micro machining processes and hybrid machining processes for hard and brittle materials. His research has been supported by EPSRC, Innovate UK, and industry.

Area of expertise: Precision Manufacturing, Micro Machining, Precision Machine Design

Qualifications 

PhD in Precision Manufacturing (Harbin Institute of Technology)

MEng in Mechanical Engineering (Harbin Institute of Technology)

PgCert in Higher Education (Middlesex University)

Memberships

FHEA, Member of Euspen

Google Scholar Profile

SCOPUS Profile.

Research Interests

• Atomic and multi-scale simulation of cutting processes and microstructure material properties.
• Experimental investigation of micro cutting processes
• Hybrid machining processes
• Ultra-precision micro machine design  

Funding

• 2015-2018, EPSRC (EP/M020657/1) ‘Development of a 3D Vibration Assisted Machining System‘, Principal investigator
• 2013-2014, EPSRC (EP/J02161X/1) 'Photo-catalytic Microbubble reactor for conversion of CO2 to Fuels' Principal investigator
• 2014, GE Oil & Gas, To identify the failure modes of the composite pipes under radially distributed compressive load

Research Supervision

• Mr Xiangyu Teng
• Mr Zi Jie Choong
• Mr Amin Dadgari
• Mr Babis  Tzivelekis
• Mr Lu Zheng
• Mr Peyman Hesamikojidi
• Mr Guoyu Fu
• Dr Wanqun Chen

Current teaching:

• ENG1007 Mechanics I
• MEC3030 Digital Manufacturing and System
• MEC3098 Mechanical Engineering Project
• MEC8095 MSc Project: Mechanical and Systems Engineering

Previous teaching:

• MEC1011 Mechanics
• MEC2009 Mechanics II
• MEC2007 Design and Manufacturing II
• MEC3018 Design for Industry
• MEC8052 Manufacturing, Materials and Processes

at Newcastle Singapore campus:

• MEC2103 Concurrent Design and Manufacture 
• MEC2105 Control System Technology
• MEC3103 Product Design Engineering
• MEC3105 Mechatronic Systems
• MEC3106 Operations and Production Management

• Articles

  • Le B, Fu G, Khaliq J, Huo D, Shyha I. Experimental investigation on thermomechanical properties and micro-machinability of carbon nanofibre reinforced epoxy nanocomposites. Journal of Manufacturing Processes 2023, 99, 781-793.
  • Zheng L, Fang M, Chen W, Huo D, Li H. Enhancement Mechanism of Fish-Scale Surface Texture on Flow Switching and Mixing Efficiency in Microfluidic Chips. Langmuir 2023, 39(21), 7396-7407.
  • Satpute V, Huo D, Hedley J, Elgendy M. Design of a novel 2D ultrasonic transducer for 2D high-frequency vibration–assisted micro-machining. International Journal of Advanced Manufacturing Technology 2023, 126, 1035-1053.
  • Gong Z, Huo D, Niu Z, Chen W, Cheng K. Robustness evaluation of control algorithms for a long-stroke fast tool servo. Journal of Manufacturing Processes 2022, 80, 458-468.
  • Fu G, Huo D, Shyha I, Sun F, Gao Q. Machinability investigation of polymer/GNP nanocomposites in micro-milling. International Journal of Advanced Manufacturing Technology 2022, 119, 2341-2353.
  • Pervaiz S, Kannan S, Anwar S, Huo D. Machinability analysis of dry and liquid nitrogen–based cryogenic cutting of Inconel 718: experimental and FE analysis. International Journal of Advanced Manufacturing Technology 2022, 118, 3801-3818.
  • Gong Z, Huo D, Niu Z, Chen W, Shyha I. Investigation of control algorithm for long-stroke fast tool servo system. Precision Engineering 2022, 75, 12-23.
  • Fu G, Wang J, Sun F, Sun F, Shyha I, Fang C, Huo D. Finite Element Modelling of Micromachining Process for Epoxy/Graphene Nanoplatelet Nanocomposites. Journal of Manufacturing Processes 2022, 77, 770-782.
  • Fu G, Sun F, Sun F, Huo D, Shyha I, Fang C, Gao Q. Finite element and experimental studies on the machining process of polymer/graphene nanoplatelet nanocomposites. Composites Part B: Engineering 2022, 230, 109545.
  • Zheng G, Huo D, Niu Z, Chen W, Cheng K. Dynamic performance of a long-stroke fast tool servo system. Nanotechnology and Precision Engineering 2022, 5, 023005.
  • Gong Z, Huo D, Niu Z, Chen W, Cheng K. A novel long-stroke fast tool servo system with counterbalance and its application to the ultra-precision machining of microstructured surfaces. Mechanical Systems and Signal Processing 2022, 173, 109063.
  • Shyha I, Huo D, Hesamikojidi P, Eldessouky H, El-Sayed MA. Performance of a new hybrid cutting-abrasive tool for the machining of fibre reinforced polymer composites. The International Journal of Advanced Manufacturing Technology 2021, 112, 1101-1113.
  • Gou N, Cheng K, Huo D. Multiscale modelling and analysis for design and development of a high-precision aerostatic bearing slideway and its digital twin. Machines 2021, 9(5), 85.
  • Chen J, Huo D, Yeddu HK. Molecular dynamics study of phase transformations in NiTi shape memory alloy embedded with precipitates. Materials Research Express 2021, 8(10), 106508.
  • Le B, Kernin A, Khaliq J, Fu G, Huo D, Bilotti E, Zhang H, Shyha I. Micro-end-milling of carbon nanotube reinforced epoxy nanocomposites manufactured using three roll mill technique. Journal of Manufacturing Processes 2021, 70, 307-320.
  • Fang C, You W, Huo D. Investigations of the static and dynamic characteristics of the precision hydrostatic spindle with mid-thrust bearing under different loads. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 2021, 236(4), 732-747.
  • Fu G, Sun F, Huo D, Shyha I, Sun F, Fang C. FE-simulation of machining processes of epoxy with Mulliken Boyce model. Journal of Manufacturing Processes 2021, 71, 134-146.
  • Shakoori N, Fu G, Le B, Khaliq J, Jiang L, Huo D, Shyha I. An experimental investigation on tool wear behaviour of uncoated and coated micro-tools in micro-milling of graphene-reinforced polymer nanocomposites. International Journal of Advanced Manufacturing Technology 2021, 113, 2003-2015.
  • Kannan S, Pervaiz S, Klassen RJ, Huo D, Haghshenas M. An energy-based analysis for machining novel AZ91 magnesium composite foam dispersed with ceramic microspheres. Journal of Manufacturing Science and Engineering, Transactions of the ASME 2021, 143(3), 031007.
  • Wang Y, Kang R, Dong Z, Wang X, Huo D, Zhang X. A novel method of blade-inclined ultrasonic cutting nomex honeycomb core with straight blade. Journal of Manufacturing Science and Engineering, Transactions of the ASME 2021, 143(4), 041012.
  • Fang C, Huo D, Huang X. A comprehensive analysis of factors affecting the accuracy of the precision hydrostatic spindle with mid-thrust bearing layout. International Journal of Advanced Manufacturing Technology 2021, 114, 949-967.
  • Zheng L, Chen W, Huo D. Review of vibration devices for vibration-assisted machining. International Journal of Advanced Manufacturing Technology 2020, 108, 1631-1651.
  • Sun F, Huo D, Fu G, Teng X, Kannan S, Zhang H. Micro-drilling of Mg-based MMCs reinforced with SiO2 nanoparticles: An experimental approach. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 2020, 234(12), 1473-1485.
  • Zheng L, Chen W, Huo D. Investigation on the tool wear suppression mechanism in non-resonant vibration-assisted micro milling. Micromachines 2020, 11(4), 380.
  • Tzivelekis C, Sgardelis P, Waldron K, Whalley R, Huo D, Dalgarno K. Fabrication routes via projection stereolithography for 3D-printing of microfluidic geometries for nucleic acid amplification. PLoS ONE 2020, 15(10), e0240237.
  • Fu G, Huo D, Shyha I, Pancholi K, Alzahrani B. Experimental investigation on micromachining of epoxy/graphene nano platelet nanocomposites. International Journal of Advanced Manufacturing Technology 2020, 107, 3169-3183.
  • Pervaiz S, Kannan S, Huo D, Mamidala R. Ecofriendly inclined drilling of carbon fiber-reinforced polymers (CFRP). International Journal of Advanced Manufacturing Technology 2020, 111(7-8), 2127-2153.
  • Le B, Khaliq J, Huo D, Teng X, Shyha I. A review on nanocomposites. Part 2: Micromachining. Journal of Manufacturing Science and Engineering, Transactions of the ASME 2020, 142(10), 100802.
  • Choong ZJ, Huo D, Ponon N, Savidis R, Degenaar P, O'Neill A. A novel hybrid technique to fabricate silicon-based micro-implants with near defect-free quality for neuroprosthetics application. Materials Science and Engineering C 2020, 110, 110737.
  • Pancholi K, Robertson P, Okpozo P, Beattie N, Huo D. Observation of stimulated emission from Rhodamine 6G-polymer aggregate adsorbed at foam interface. Journal of Physics: Energy 2019, 1(1), 015007.
  • Gupta R, Huo D, White M, Jha V, Stenning GBG, Pancholi K. Novel method of healing the fibre reinforced thermoplastic composite: A potential model for offshore applications. Composites Communications 2019, 16, 67-78.
  • Chen W, Sun Y, Huo D, Teng X. Modelling of the Influence of Tool Runout on Surface Generation in Micro Milling. Chinese Journal of Mechanical Engineering (English Edition) 2019, 32(2).
  • Chen W, Zheng L, Xie W, Yang K, Huo D. Modelling and experimental investigation on textured surface generation in vibration-assisted micro-milling. Journal of Materials Processing Technology 2019, 266, 339-350.
  • Choong ZJ, Huo D, Degenaar P, O'Neill A. Micro-machinability and edge chipping mechanism studies on diamond micro-milling of monocrystalline silicon. Journal of Manufacturing Processes 2019, 38, 93-103.
  • Gao Q, Lu L, Zhang R, Song L, Huo D, Wang G. Investigation on the thermal behavior of an aerostatic spindle system considering multi-physics coupling effect. International Journal of Advanced Manufacturing Technology 2019, 102, 3813-3823.
  • Chen W, Zheng L, Teng X, Yang K, Huo D. Finite element simulation and experimental investigation on cutting mechanism in vibration-assisted micro-milling. International Journal of Advanced Manufacturing Technology 2019, 105(11), 4539-4549.
  • Zheng L, Chen W, Huo D. Experimental investigation on burr formation in vibration-assisted micro-milling of Ti-6Al-4V. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 2019, 233(12), 4112-4119.
  • Gupta R, Pancholi K, De Sa R, Murray D, Huo D, Droubi G, White M, Njuguna J. Effect of Oleic Acid Coating of Iron Oxide Nanoparticles on Properties of Magnetic Polyamide-6 Nanocomposite. JOM 2019, 71, 3119-3128.
  • Choong ZJ, Huo D, Degenaar P, O'Neill A. Edge chipping minimisation strategy for milling of monocrystalline silicon: A molecular dynamics study. Applied Surface Science 2019, 486, 166-178.
  • Chen W, Tong Z, Huo D, Zhong W, Jiang X. A forward closed-loop virtual simulation system for milling process considering dynamics processing-machine interactions. International Journal of Advanced Manufacturing Technology 2019, 104, 2317-2328.
  • Chen W, Zheng L, Huo D, Chen Y. Surface texture formation by non-resonant vibration assisted micro milling. Journal of Micromechanics and Microengineering 2018, 28(2), 025006.
  • Chen W, Huo D, Shi Y, Hale J. State-of-the-art review on vibration-assisted milling: principle, system design, and application. The International Journal of Advanced Manufacturing Technology 2018, 97(5-8), 2033-2049.
  • Zheng L, Chen W, Pozzi M, Teng X, Huo D. Modulation of surface wettability by vibration assisted milling. Precision Engineering 2018, 55, 179-188.
  • Lin C, Shen Z, Yu J, Li P, Huo D. Modelling and analysis of characteristics of a piezoelectric-actuated micro-/nano compliant platform using bond graph approach. Micromachines 2018, 9(10), 498.
  • Chen W, Huo D, Hale J, Ding H. Kinematics and tool-workpiece separation analysis of vibration assisted milling. International Journal of Mechanical Sciences 2018, 136, 169-178.
  • Dadgari A, Huo D, Swailes D. Investigation on tool wear and tool life prediction in micro-milling of Ti-6Al-4V. Nami Jishu yu Jingmi Gongcheng/Nanotechnology and Precision Engineering 2018, 1(4), 218-225.
  • Teng X, Huo D, Chen W, Wong E, Zheng L, Shyha I. Finite element modelling on cutting mechanism of nano Mg/SiC metal matrix composites considering cutting edge radius. Journal of Manufacturing Processes 2018, 32, 116-126.
  • Gariani S, Shyha I, Inam F, Huo D. Experimental analysis of system parameters for minimum cutting fluid consumption when machining Ti-6Al-4V using a novel supply system. International Journal of Advanced Manufacturing Technology 2018, 95(5-8), 2795-2809.
  • Teng X, Chen W, Huo D, Shyha I, Lin C. Comparison of cutting mechanism when machining micro and nano-particles reinforced SiC/Al metal matrix composites. Composite Structures 2018, 203, 636-647.
  • Chen W, Teng X, Zheng L, Xie W, Huo D. Burr reduction mechanism in vibration-assisted micro milling. Manufacturing Letters 2018, 16, 6-9.
  • Shyha I, Gariani S, El-Sayed M, Huo D. Analysis of Microstructure and Chip Formation When Machining Ti-6Al-4V. Metals 2018, 8(3), 185.
  • Teng X, Huo D, Shyha I, Chen W, Wong E. An experimental study on tool wear behaviour in micro milling of nano Mg/Ti metal matrix composites. International Journal of Advanced Manufacturing Technology 2018, 96(5-8), 2127-2140.
  • Chen W, Xie W, Huo D, Yang K. A novel 3D surface generation model for micro milling based on homogeneous matrix transformation and dynamic regenerative effect. International Journal of Mechanical Sciences 2018, 144, 146-157.
  • Chen W, Lu L, Xie W, Huo D, Yang K. A new surface topography-based method to quantify axial error of high speed milling cutters. Journal of Manufacturing Science and Engineering 2018, 140(11), 111014.
  • Dadgari A, Huo D, Swailes D. The effect of machining toolpath on surface roughness and dimensional accuracy for high-speed micro milling. Solid State Phenomena 2017, 261, 69-76.
  • Zhang Y, Wang Y, Zhao Y, Wang J, Lu J, Huo D. The deformation yield criterion of metallic glass in the cutting process and its experimental verification. Gaojishu Tongxin/Chinese High Technology Letters 2017, 27(3), 285-293.
  • Chen W, Huo D, Teng X, Sun Y. Surface generation modelling for micro end milling considering the minimum chip thickness and tool runout. Procedia CIRP 2017, 58, 364-369.
  • Huo D, Chen W, Teng X, Lin C, Yang K. Modeling the Influence of Tool Deflection on Cutting Force and Surface Generation in Micro-Milling. Micromachines 2017, 8(6), 1-10.
  • Dadgari A, Huo D, Swailes D. Investigation of Machining Tool Path on Surface Roughness and Dimensional Accuracy for High-Speed Micro Milling. International Journal of Robotics and Mechatronics 2017, 4(1), 8-15.
  • Gariani S, Shyha I, El-Sayed MA, Huo D. Investigation into the effect of cutting fluid concentration on the machinability of Ti-6Al-4V using vegetable oil-based cutting fluids. Journal of Engineering Technology 2017, 6(2), 414-423.
  • Gariani S, Shyha I, Inam F, Huo D. Evaluation of a novel controlled cutting fluid impinging supply system when machining titanium alloys. Applied Sciences 2017, 7(6), 560.
  • Zhao Y, Li T, Zhang Y, Huo D. Effect of Machining Parameters on the Cutting Force and Microstructure in Nanometric Cutting of Cu₅₀Zr₅₀ Metallic Glass. Current Nanoscience 2017, 13(1), 48-54.
  • Cai Z, Lin C, Huo D, Zhu C. Design and analysis of cleaning mechanism for an intermittent screw-driven pipeline robot. Journal of Mechanical Science and Technology 2017, 31(2), 911-921.
  • Chen W, Teng X, Huo D, Wang Q. An improved cutting force model for micro milling considering machining dynamics. International Journal of Advanced Manufacturing Technology 2017, 93(9-12), 3005-3016.
  • Zhao Y, Wei X, Zhang Y, Wang J, Huo D. Potential energy/volume evolution and atomic trajectories analysis of amorphous alloys in nanometric cutting process: A molecular dynamic simulation approach. Journal of Computational and Theoretical Nanoscience 2016, 13(1), 752-760.
  • Teng X, Huo D, Wong E, Meenashisundaram G, Guptab M. Micro-machinability of nanoparticle-reinforced Mg-based MMCs: An experimental investigation. International Journal of Advanced Manufacturing Technology 2016, 87(5), 2165–2178.
  • Zhao Y, Wei X, Zhang Y, Wu F, Huo D. Investigation on Cutting Force and Temperature of Cutting Cu₅₀Zr₅₀ Metallic Glass by Molecular Dynamics Simulation. Key Engineering Materials 2016, 667, 88-94.
  • Chen W, Huo D, Xie W, Teng X, Zhang J. Integrated simulation method for interaction between manufacturing process and machine tool. Chinese Journal of Mechanical Engineering 2016, 29(6), 1090-1095.
  • Choong Z, Huo D, Degenaar P, O'Neill A. Effect of crystallographic orientation and employment of different cutting tools on micro-end-milling of monocrystalline silicon. Proceedings of the Institution of Mechanical Engineering. Part B: Journal of Engineering Manufacture 2016, 230(9), 1756-1764.
  • Huo D, Choong Z, Shi Y, Hedley J, Zhao Y. Diamond Micro-milling of Lithium Niobate for Sensing applications. Journal of Micromechanics and Microengineering 2016, 26(9), 095005.
  • Zhao Y, Lu J, Zhang Y, Wu F, Huo D. Development of an analytical model based on Mohr–Coulomb criterion for cutting of metallic glasses. International Journal of Mechanical Sciences 2016, 106, 168-175.
  • Lim BY, Lau MWS, Wan S, Leong J, Lim A, Huo D, Goh KL. Development of a two-stage Lau-Wan Wankel pump/mixer. International Journal of Mechanical Engineering Education 2016, 44(2), 97-112.
  • Zhao Y, Wei X, Zhang Y, Wang J, Huo D. Crystallization of amorphous materials and deformation mechanism of nanocrystalline materials under cutting loads: a molecular dynamics simulation approach. Journal of Non-Crystalline Solids 2016, 439, 21-29.
  • Huo DH, Lin C, Choong Z, Pancholi K, Degenaar P. Surface and subsurface characterisation in micro-milling of monocrystalline silicon. International Journal of Advanced Manufacturing Technology 2015, 81(5-8), 1319-1331.
  • Lin C, Ji J, Tao Y, Huo D, Cai L, Cheng K. Structural design and control strategy analysis of micro/nano transmission platform. Transactions of Nanjing University of Aeronautics and Astronautics 2015, 31(5), 484-491.
  • Chen W, Lu L, Yang K, Huo D, Su H, Zhang Q. A novel machine tool design approach based on surface generation simulation and its implementation on a fly cutting machine tool. International Journal of Advanced Manufacturing Technology 2015.
  • Chen W, Liang Y, Sun Y, Huo D, Lu L, Liu H. Design philosophy of an ultra-precision fly cutting machine tool for KDP crystal machining and its implementation on the structure design. International Journal of Advanced Manufacturing Technology 2014, 70(1-4), 429-438.
  • Huo D, Lin C, Dalgarno K. An experimental investigation on micro machining of fine-grained graphite. International Journal of Advanced Manufacturing Technology 2014, 72(5-8), 943-953.
  • Chen W, Liang Y, Sun Y, Huo D, Su H, Zhang F. A two-round design method for ultra-precision flycutting machine tools with stringent process requirements. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 2014.
  • Zhao Y, Wei X, Zhang Y, Huo D. A review of the manufacturing technologies and deformation mechanisms of amorphous alloys. Gaojishu Tongxin/Chinese High Technology Letters 2014, 24(11), 1176-1186.
  • Qiu H, Yue Y, Kubo A, Lin C, Cheng K, Huo D, Li D. Performance Improvement of the LM Device and Its Application to Precise Measurement of Motion Trajectories within a Small Range with a Machining Centre. Modern Mechanical Engineering 2012, 2, 71-85.
  • Huo D, Cheng K. Experimental investigation on micromilling of oxygen-free, high-conductivity copper using tungsten carbide, chemistry vapour deposition, and single-crystal diamond micro tools. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 2010, 224(6), 995-1003.
  • Huo DH, Cheng K, Wardle F. Design of a five-axis ultra-precision micro-milling machine-UltraMill. Part 2: integrated dynamic modelling, design optimisation and analysis. International Journal of Advanced Manufacturing Technology 2010, 47(9-12), 879-890.
  • Huo DH, Cheng K, Wardle F. Design of a five-axis ultra-precision micro-milling machine-UltraMill. Part 1: holistic design approach, design considerations and specifications. International Journal of Advanced Manufacturing Technology 2010, 47(9-12), 867-877.
  • Wardle F, Bond C, Wilson C, Cheng K, Huo D. Dynamic characteristics of a direct-drive air-bearing slide system with squeeze film damping. International Journal of Advanced Manufacturing Technology 2009, 47(9-12), 911-918.
  • Huo D, Cheng K, Wardle F. A holistic integrated dynamic design and modeling approach applied to the development of ultraprecision micro milling machines. International Journal of Machine Tool and Manufacture 2009, 50(4), 335-343.
  • Yang Y, Chen S, Huo D, Cheng K. Performance analysis and optimal design of fast tool servo used for machining microstructured surfaces. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 2008, 222(C8), 1541-1546.
  • Huo D, Cheng K. A dynamics-driven approach to the design of precision machine tools for micro-manufacturing and its implementation perspectives. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 2008, 222(1), 1-13.
  • Huo D, Liang Y, Cheng K. An Investigation of Nanoindentation Tests on the Single Crystal Copper Thin Film via an AFM and MD Simulation. Proceedings of the Institution of Mechanical Engineers Part C: Journal of Mechanical Engineering Science 2007, 221(2), 259-266.
  • Sun X, Chen S, Cheng K, Huo D, Chu W. Multiscale Simulation on Nanometric Cutting of Single Crystal Copper. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 2006, 220(7), 1217-1222.

• Book Chapters

  • Le B, Shyha I, Huo D. Machining of Nano-Structured Polymer Composites. In: Shyha I; Huao D, ed. Advances in Machining of Composite Materials. Cham: Springer Science and Business Media B.V, 2021, pp.369-394.
  • Shyha I, Huo D, Davim JP. Introduction. In: Shyha I; Huo D, ed. Advances in Machining of Composite Materials. Cham: Springer Science and Business Media B.V, 2021, pp.1-13.
  • Teng X, Huo D, Shyha I. Finite Element Modelling of Machining of Metal Matrix Composites. In: Shyha I; Huo D, ed. Advances in Machining of Composite Materials. Cham: Springer Science and Business Media B.V, 2021, pp.219-252.
  • Teng X, Huo D. Conventional Machining of Metal Matrix Composites. In: Shyha I; Huo D, ed. Advances in Machining of Composite Materials. Cham: Springer Science and Business Media B.V, 2021, pp.159-181.
  • Chen W, Huo D. Modeling of interaction between precision machining process and machine tools. In: Advanced Machining Processes: Innovative Modeling Techniques. Boca Raton, FL, USA: CRC Press, 2017, pp.107-140.
  • Mativenga PT, Aramcharoen A, Huo D. Micro Tooling Design and Manufacturing. In: Kai Cheng and Dehong Huo, ed. Micro-Cutting: Fundamentals and Applications. Chichester: John Wiley & Sons Ltd, 2013, pp.45-61.
  • Huo D, Cheng K. Micro Cutting Mechanics. In: Kai Cheng and Dehong Huo, ed. Micro-Cutting: Fundamentals and Applications. Chichester: John Wiley & Sons Ltd, 2013, pp.19-44.
  • Huo D, Cheng K. Diamond turning and micro turning. In: Kai Cheng and Dehong Huo, ed. Micro-Cutting: Fundamentals and Applications. John Wiley & Sons Ltd, 2013, pp.155-183.
  • Huo D, Cheng K, Ding H. Design and Performance Assessment of a 5-Axis Ultra-precision Micro-milling Machine. In: Liu, X., Bai, Z., Shuang, Y., Zhou, C., Shao, J, ed. Advanced Materials and Process Technology. Zurich, Switzerland: Trans Tech Publications Ltd, 2012, pp.1699-1704.

• Conference Proceedings (inc. Abstracts)

  • Gao Q, Lu L, Chen W, Wang G, Huo D. Investigation on the performance of an aerostatic spindle with consideration of fluid-structure-thermal interaction effect. In: European Society for Precision Engineering and Nanotechnology 18th International Conference and Exhibition (EUSPEN 2018). 2018, Venice: euspen.
  • Shyha I, Huo D, Le B, Fu G, Soliman E, Alzahrani B. Investigation on micro-slotting of polymer nanocomposites: Cutting forces. In: 16th International Conference on Manufacturing Research (Advances in Manufacturing Technology XXXII). 2018, University of Skövde, Sweden: IOS Press BV.
  • Huo D, Chen W, Teng X, Zheng L, Lin C. Investigation on cutting mechanism of vibration assisted micro-milling. In: European Society for Precision Engineering and Nanotechnology 18th International Conference and Exhibition (EUSPEN 2018). 2018, Venice: euspen.
  • Shyha I, Le B, Huo D, Fu G, Arrowsmith H, Ahmed A. Analysis of surface quality when micromilling polymer nanocomposites. In: 16th International Conference on Manufacturing Research (Advances in Manufacturing Technology XXXII). 2018, University of Skövde, Sweden: IOS Press BV.
  • Zhao Y, Li T, Zhang Y, Wang J, Huo D. The effect of stress on shear dilatation and cutting force during nanometric machining of amorphous alloys. In: 17th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2017. 2017, Hannover, Germany: euspen.
  • Naylor A, Huo D, Hackney PM, Perera N. Operational performance of individual handsaw teeth. In: 23rd International Wood Machining Seminar. 2017, Warsaw, Poland.
  • Choong ZJ, Huo D, Degenaar P, O'Neill A. Micro-machining of monocrystalline silicon with improved edge quality. In: 17th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2017. 2017, Hannover, Germany: euspen.
  • Teng X, Huo D, Wong WLE, Sankaranarayanan S, Gupta M. Machinability Investigation in Micro-milling of Mg Based MMCs with Nano-sized Particles. In: TMS 2017. 2017, San Diego, USA: Springer.
  • Teng X, Huo D, Wong WLE, Sankaranarayanan S, Gupta M. Machinability investigation in micro-milling of Mg based MMCs with nano-sized particles. In: TMS 2017 146th Annual Meeting and Exhibition. 2017, San Diego, CA, USA: Springer International Publishing.
  • Chen W, Huo D, Hale J. Investigation on cutting mechanism in vibration assisted micro milling. In: 17th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2017. 2017, Hannover, Germany: euspen.
  • Gupta R, Pancholi K, Prabhu R, Pancholi M, Huo D, Jha V, Latto J. Integrated self-healing of the composite offshore structures. In: OCEANS 2017 - Aberdeen. 2017, Aberdeen, Scotland: Institute of Electrical and Electronics Engineers Inc.
  • Huo D, Chen W, Lin C, Zheng L, Hale J. Development of a high bandwidth XY stage for vibration-assisted milling. In: 17th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2017. 2017, Hannover, Germany: euspen.
  • Teng X, Huo D, Chen W. An investigation into finite element modelling of micro machining of nano Mg/SiC metal matrix composites. In: 17th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2017. 2017, Hannover, Germany: euspen.
  • Choong ZJ, Huo D, Degenaar P, O'Neill A. Micro-Machinability Studies of Single Crystal Silicon Using Diamond End-Mill. In: ASME 2016 11th International Manufacturing Science and Engineering Conference. 2016, Blacksburg, Virginia, USA: American Society of Mechanical Engineers.
  • Choong ZJ, Huo D, Degenaar P, O'neill A. Investigation of edge-chipping reduction on silicon micro-milling. In: 16th International Conference of the European Society for Precision Engineering and Nanotechnology (EUSPEN 2016). 2016, Nottingham, UK: EUSPEN.
  • Shi Y, Huo D, Zhao Y, Al-Shibaany ZYA, Hedley J. Investigation of micro milling of lithium niobate for biosensor applications. In: 15th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2015. 2015, Leuven, Belgium: euspen.
  • Pancholi K, Jha V, Dodds N, Huo D, Latto J. In situ and real time x-ray computed tomography for the micromechanics based constitutive modelling of the unbonded flexible riser. In: Proceedings of the ASME 2015 International Conference on Ocean, Offshore and Arctic Engineering - OMAE 2015. 2015, St John's, Newfoundland, Canada: American Society of Mechanical Engineers (ASME).
  • Teng X, Huo D, Wong WLE, Gupta M. Experiment based investigation into micro machinability of Mg based metal matrix composites (MMCs) with nano-sized reinforcements. In: 2015 21st International Conference on Automation and Computing: Automation, Computing and Manufacturing for New Economic Growth, ICAC 2015. 2015, Glasgow, UK: Institute of Electrical and Electronics Engineers Inc.
  • Al-Shibaany ZYA, Choong ZJ, Huo D, Hedley J, Hu ZX. CNC Machining of Lithium Niobate for Rapid Prototyping of Sensors. In: 2015 IEEE SENSORS. 2015, Busan, South Korea: IEEE.
  • Huo D, Zhao Y, Dalgarno K. Surface integrity characteristics in micro end milling of monocrystalline silicon. In: 14th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2014. 2014, Dubrovnik, Croatia: euspen.
  • Al-Shibaany ZYA, Hedley J, Huo DH, Hu ZX. Micromachining Lithium Niobate for Rapid Prototyping of Resonant Biosensors. In: 27th International Conference on CADCAM, Robotics and Factories of the Future 2014 (CARs & FoF). 2014, London: Institute of Physics Publishing Ltd.
  • Zhang Y, Wang J, Zhao Y, Huo D. Element-based knowledge representation in intelligent design and its prototype for knowledge processing. In: 20th International Conference on Automation and Computing: Future Automation, Computing and Manufacturing (ICAC 2014). 2014, Cranfield University, Bedford, UK: IEEE.
  • Zhao Y, Zhang Y, Huo D, Teng X, Shi Y. An experimental investigation on the surface morphology in micro-end-milling of glass. In: ICAC 2014 - Proceedings of the 20th International Conference on Automation and Computing: Future Automation, Computing and Manufacturing. 2014, Cranfield University, Bedford, UK: IEEE.
  • Lin C, Guo Q, Cheng K, Qiu H, Huo D. Modeling of Dynamic Cutting Force in High-Speed Dry Gear based on Multifactor Coupling. In: The 5th International Conference on Responsive Manufacturing - Green Manufacturing. 2010.
  • Huo D, Maropoulos PG, Cheng CH. The Framework of the Virtual Laser Tracker – A Systematic Approach to the Assessment of Error sources and Uncertainty in Laser Tracker Measurement. In: 6th International Conference on Digital Enterprise Technology. 2009, HongKong.
  • Dai W, Maropoulos P, Tang X, Huo D, Cai B. Quality Planning Based on Risk Assessment. In: 6th International Conference on Digital Enterprise Technology. 2009, Hong Kong.
  • Cheng CH, Huo D, Zhang X, Dai W, Maropoulos PG. Large Volume Metrology Process Model: Measurability Analysis with Integration of Metrology Classification Model and Feature-Based Selection Model. In: 6th International Conference on Digital Enterprise Technology. 2009, Hong Kong.
  • Cheng K, Huo D, Wardle F, Nor KM. Design of a 5-Axis Ultraprecision Micro Milling Machine (UltraMill) and its Key Enabling Technologies. In: The 9th International Conference of the European Society for Precision Engineering and Nanotechnology. 2009.
  • Lin C, Cheng K, Qiu H, Huo D, Sun X. A methodology for performance measurement and assessment of bench-top precision machine tools. In: 9th International Conference and Exhibition on Laser Metrology, Machine Tool, CMM & Robotic Performance. 2009, Uxbridge, UK.
  • Huo D, Cheng K. Modeling and control of two-axis direct drive slides with application to nano/micro machining. In: 7th International Conference of the European Society for Precision Engineering and Nanotechnology (EUSPEN). 2007, Bremen, Germany: EUSPEN.
  • Nor KM, Huo D, Cheng K. A PC-Based Control System for Multiple-Axis Micro/Nano Machining: Control Architecture and Implementations. In: 8th International Conference and Exhibition on Laser Metrology Machine Tool, CMM & Robotic Performance (LAMDAMAP 2007). 2007, Cardiff, Wales.
  • Hussin ZM, Cheng K, Huo D. On-Line Modal Identification of a CNC Machining System Based on Surface Roughness Laser Scattering: Theoretical Perspectives. In: 2nd Virtual International Conference on Intelligent Production Machine and System (IPROMS 2006). 2006, Online: Elsevier Science.
  • Huo D, Cheng K. Design of a piezo-driven fast tool servo for diamond cutting: dynamics and application perspectives. In: Proceedings of 6th International Conference of the European Society for Precision Engineering and Nanotechnology (EUSPEN 2006). 2006, Vienna, Austria: EUSPEN.
  • Huo D, Cheng K. A Dynamics-Driven Approach to Precision Machines Design for Micro-Manufacturing and Its Implementation Perspectives. In: 2nd International Conference on Multi-Material Micro Manufacture (4M2006). 2006, Grenoble, France: Elsevier.

• Edited Book

  • Cheng K, Huo D, ed. Micro-Cutting: Fundamentals and Applications. Wiley, 2013.

• Editorials

  • Huo D, Cheng K. Vibration assisted machining. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 2019, 233(12), 4079-4080.
  • Cheng K, Huo D. Preface. Micro-Cutting: Fundamentals and Applications 2013, xv-xvii.

• Review

  • Gao Q, Chen W, Lu L, Huo D, Cheng K. Aerostatic bearings design and analysis with the application to precision engineering: State-of-the-art and future perspectives. Tribology International 2019, 135, 1-17.